Preliminary and final filtration of drinking water

EPNS

Stainless steel mesh

5 - 70

Pleated

• High performance precoat filter
• long service life,
• the possibility of full recovery and multiple reuse,
• working temperature is 90 ºC.
• Used for coarse pre-filtration.

EPV.P

Polypropylene textured cabled yarn

5;

10;

20

Spirally wound,

depth

• Multilayer structure with a gradient of porosity
• increased dirt holding capacity and resource,
• operating temperature is 80 ºC.
• Used for pre-filtration only.

EPVg.P

Polypropylene

0.5 - 20

Depth

Pleated

• Rigid matrix
• High retention efficiency
• Multiple regeneration
• Operating temperature up to 90 °С
• Used for preliminary and final filtration

EPV.SC

Fiberglass/ cellulose/ polypropylene combination

1.0 – 0.8

Depth

Pleated

Hydrophilic

• Rigid matrix
• High porosity
• High micro particles adsorption
• High hydrophilicity (filtration by gravity is available)
• Operating temperature up to 80 °С
• Max flow rate at low pressure drop (low cost)

EPM.K

Nylon

0.2;

0.45;

0.65

Membrane

Pleated

Hydrophilic

• Wide chemical compatibility (pH 3-14)
• Natural hydrophilicity
• High flow rates due to increased surface area up to 0.85 m²/250 mm height
• Used only as a finishing filter in combination with an effective pre-filter

EPM.PS

Polyethersulfone

0.2;

0.45;

0.65

Membrane

Pleated

Hydrophilic

• Wide chemical compatibility (pH 1-14)
• Excellent thermal stability (up to 100 °C in water)
• Highly asymmetric structure
• Longer service life due to increased surface area up to 0.76 m²/250 mm height
• Multiple regeneration
• Used only as a finishing filter in combination with an effective pre-filter