EPM.K membrane-based filter cartridges are produced by the proprietary technology of Technofilter RME Ltd on the basis of the polyamide hydrophilic membrane with the micron ratings of 0.1 - 3 μm. Filter elements have high throughput and wide chemical compatibility. The hydrophilic polyamide membrane makes EPM.K ideal for application in the processes of filtration of water and alkaline solutions, liquids with low, normal and high pH level.
Features |
Advantages |
---|---|
Proprietary polyamide hydrophilic membrane Nylon6+66 with a wide range of pore sizes |
|
Large filtration surface area |
|
High strength of the cartridge structure |
|
100% integrity control Nontoxic, Apyrogenic |
|
Main applications
- In medicine and biopharmacy for removal of mechanical contaminants and clarifying of parenteral and ophthalmic solutions, antibiotics, culture, bacterial and enzymatic media, biologics and vaccines, vitamin and galenic preparations, buffer solutions, water for pharmaceutical use (water for injection, pyrogen-free water, water for rinsing, etc.).
- In beverage industry for biological, cold and polishing filtration of beer, wine, liqueurs of premium-class quality, for microbiological treatment of still bottled water, for finish filtration of low-alcoholic and non-alcoholic beverages, recipes and rinsing water.
- In microelectronics, radiotechnics and biochemistry for finish treatment of deionized water.
- In other industries for fine filtration of liquid media from particles ≥ 0.1 μm.
Cartridge material
Membrane |
Nylon6+66 |
Prefilter membrane (double layer execution) |
Nylon6+66 |
Draining layer |
Polypropylene |
Body, end parts, adapter |
Polypropylene |
O-rings |
Silicone (others on request) |
Nominal Dimentions
Height (H), mm |
Diameter (D), mm |
Filter surface area (S), m2 |
---|---|---|
100 (4") |
70 |
0.36 |
250 (10") |
70 |
0.9 |
500 (20") |
70 |
1.8 |
750 (30") |
70 |
2.6 |
1000 (40") |
70 |
3.7 |
Operational parameters
Maximal differential pressure, MPa |
0,5 MPa at 20°C, 0,2 MPa at 80°C |
Maximal reverse differential pressure, MPa |
0,1 MPa at 20°C |
Maximal operational temperature, °C |
80°С |
Direct flow wash out |
Hot water (up to 80 °C) and chemical agents |
Autoclaving |
121°С, 0.12 MPa, 30 min., 20 cycles |
Steam sterilization |
121°С, 0.12 MPa, 30 min., 10 cycles |
* For detailed instructions on wash out and sterilization of cartridges please contact technical specialists of Technofilter.
EPM.K membrane-based filter cartridges are produced in accordance with the regulatory technical documents on product quality and are certified for use in the filtration processes of biopharmaceutical solutions. All EPM.K filter elements are subjected to wash out from organic and mechanical impurities with high-purity water and to 100% integrity control.
Wash out, integrity control, drying, final assembly and packaging of membrane filter cartridges is carried out in special clean rooms C and D (ISO class 6 and 7) according to the classification of clean rooms in the pharmaceutical industry.
EPM.K membrane-based elements undergo tests for bacterial and toxicological safety.
Materials used in the construction of filters have a minimal amount of extractable components and are approved for contact with intravenous drugs and food.
Integrity test values of EPM.K with height 250 mm
Grade |
Max. Diffusion D, ml/min |
Test pressure, MPa (kgf/cm2) |
---|---|---|
EPM.K-010 |
30 |
0,30 (3,0) at 20°С |
EPM.K-020 |
30 |
0,25 (2,5) at 20°С |
EPM.K-045 |
30 |
0,16 (1,6) at 20°С |
EPM.K-065 |
30 |
0,11 (1,1) at 20°С |
EPM.K-080 |
30 |
0,08 (0,8) at 20°С |
EPM.K-100 |
30 |
0,06 (0,6) at 20°С |
EPM.K-300 |
30 |
0,03 (0,3) at 20°С |
* All values are given for the elements 10” (250 mm) height. To obtain maximum permissible diffusion values for filter cartridges 20” (500 mm) and 30” (750 mm) height the diffusion values for the standard (10”) cartridge should be multiplied by 2 or 3 respectively.
EPM.K ordering information
EPM.K |
010 |
А1 |
250 |
E |
---|---|---|---|---|
Grade |
Micron rating |
Adapter code |
Nominal height |
Application |
010 = 0,1 μm |
A (А1), A4, D (D1), В, ВSl |
100 = 100 mm |
M – medical and biopharmaceutical industry F – food industry E – microelectronics industry |