The EPVg.P filter element is produced on the basis of the increased density pleated filter material made of polypropylene microfibers.
EPVg.P filter elements are designed to retain microparticles efficiently within the range of 0.2-50 μm. The filter material provides high chemical and thermal resistance in a wide range of ph and organic solvents. EPVg.P is designed for various applications, where it is necessary to provide high flow rate of the filter in the processes of preliminary and final filtration. Full polypropylene structure ensures high chemical stability and mechanical load resistance.
|
Features |
Advantages |
|---|---|
|
Full propylene pleated filter with excellent filtration characteristics |
|
|
High strength of the filter element |
|
|
Non-toxic |
|
Main applications
In biopharmaceuticals, chemicals, food industry for wide range of applications.
Cartridge material
|
Filter material |
Increased density polypropylene microfiber fabric |
|
Draining layer |
Polypropylene |
|
Body, end parts, adapter |
Polypropylene |
|
O-rings |
Silicone (viton, fluoropolymeric, EPDM on request) |
Nominal Dimensions
|
Height (H), mm |
Diameter (D), mm |
Filter surface area (S), m2 |
|---|---|---|
|
60 (2,5'') |
70 |
0,12-0,23 |
|
125 (5") |
70 |
0,25-0,5 |
|
250 (10") |
70 |
0,5-1,0 |
|
500 (20") |
70 |
1,0-2,0 |
|
750 (30") |
70 |
1,5-3,0 |
|
1000 (40") |
70 |
2,0-4,0 |
Micron rating
|
Pore size, μm |
Ordering code |
|---|---|
|
0,2 |
020 |
|
0,5 |
050 |
|
0,65 |
065 |
|
0,8 |
080 |
|
1 |
100 |
|
1,5 |
150 |
|
2 |
200 |
|
3 |
300 |
|
5 |
500 |
|
10 |
1000 |
|
20 |
2000 |
|
50 |
5000 |
Operational parameters
|
Maximal differential pressure |
0,5 MPa at 20°C, 0,2 MPa at 80°C |
|
Maximal reverse differential pressure |
0,5 MPa at 20°C, 0,2 MPa at 80°C |
|
Maximal operational temperature |
up to 90°С |
|
Direct flow wash out |
Hot water (up to 95 °C) and chemical agents, CIP |
|
Autoclaving |
121-132°С, 30 min., 50 cycles |
|
Steam sterilization |
до 132°С, 30 min., 50 cycles |
* For detailed instructions on wash out and sterilization of cartridges and capsules please contact technical specialists of Technofilter RME.
EPVg.P filter cartridges are produced in accordance with the regulatory technical documents on product quality and are certified for use in the filtration processes of biopharmaceutical solutions. All EPVg.P filter cartridges are subjected to wash out from organic and mechanical impurities with high-purity water.
Wash out, integrity control, drying, final assembly and packaging of membrane filter cartridges is carried out in special clean rooms (ISO class 6 and 7) according to the classification of clean rooms in the pharmaceutical industry in accordance with EU GGMP.
Materials used for production of EPVg.P filters undergo tests for toxicological safety, they have a minimal amount of extractable components and are approved for contact with intravenous drugs and food.
EPVg.P ordering information
|
EPVg.P |
100 |
А1 |
750 |
|---|---|---|---|
|
Grade |
Micron rating |
Adapter code |
Nominal height |
|
020 = 0,2 μm |
А (А1), А4, D (D1), В, ВSl |
100 = 100 mm |