The EPV.SC filter elements are produced on the basis of the pleated filter material made of microfine glass, cellulose and polypropylene fibers.
Efficient filtration is achieved by means of high adsorption of fiberglass and cellulose and diversity of chemical nature of microfibers in combination with mechanical retention.
Features |
Advantages |
---|---|
Glass, cellulose and polypropylene microfibers based pleated filter |
|
High strength, the stable matrix of the filter element |
|
Main applications
- in medicine and biopharmaceuticals to reduce bacterial load before membrane cartridges, for fine clarifying filtration of pharmaceutical liquids with a high content of suspended particles, for filtration of high-viscosity liquids, syrups, galenic preparations;
- in the food industry for preliminary and final filtration of wines, for clarification of colored liquor products, finishing stages of beer filtration and beer-soft drinks with the purpose of increasing the shelf life, for fine cleaning of technological, drinking, mineral and bottled water, etc;
- in other industries for the retention of suspensions, microparticles and colloids with a size of 0.5-3.0 microns or more.
Cartridge materials
Filter material |
Microfibers of glass, cellulose and polypropylene |
Draining layer |
Polypropylene |
Body, end parts, adapter |
Polypropylene |
O-rings |
Silicone (viton, EPDM on request) |
Nominal dimensions
Height (H), mm |
Diameter (D), mm |
Filter surface area (S), m2 |
---|---|---|
125 (5") |
70 |
0,25 |
250 (10") |
70 |
0,5 |
500 (20") |
70 |
1,0 |
750 (30") |
70 |
1,5 |
1000 (40") |
70 |
2,0 |
Micron rating
Pore size, μm |
Ordering code |
---|---|
0,5 |
050 |
0,8 |
080 |
1 |
100 |
3 |
300 |
Operational parameters
Maximal differential pressure |
0,5 MPa at 20°C, 0,2 MPa at 80°C |
Maximal reverse differential pressure |
0,2 MPa at 20°C, 0,05 MPa at 80°C |
Maximal operational temperature |
80°С |
Direct flow wash out |
Горячая вода (до 80°C), химические реагенты |
Autoclaving |
121°С, 0,12 MPa at, 30 min, 50 cycles |
Steam sterilization |
132°С, 0,2 MPa at, 30 min, 20 cycles |
* For detailed instructions on wash out and sterilization of cartridges and capsules please contact technical specialists of Technofilter RME.
EPV.SC filter elements are produced in accordance with the regulatory technical documents on product quality and are certified for use in the filtration processes of biopharmaceutical solutions. All EPV.SC filter elements are subjected to wash out from organic and mechanical impurities with high-purity water.
EPV.SC ordering information
EPV.SC |
300/100 |
D1 |
500 |
---|---|---|---|
Grade |
Micron rating |
Adapter code |
Nominal height |
050 = 0,5 μm |
А (А1), А4, D (D1), В, ВSl |
125 = 125 mm |