For effective protection of membrane filters, clarifying filtration of liquids with pyrogen control, reduction of viruses, bacteria, colloids, lipids, proteins, polysaccharides and other submicron pathogens and inorganic contaminants.
Materials
Filter material Natural mineral fiber laminated between two layers of non-woven
polypropylene
Draining layer Polypropylene
Body, end parts, adapter * Polypropylene
O-rings Silicone (viton, EPDM and other materials on request)
* only for filter cartridges
Operational parameters
Maximal differential pressure 0,4 MPa at 20 °C, 0,2 MPa at 80 °C (for filter cartridges)
0,4 MPa at 20 °C, 0,2 MPa at 60 °C (for filter capsules)
Maximal reverse differential pressure 0,1 MPa at 20 °C
Maximal operational temperature, °C up to 80 °C (for filter cartridges)
Sterilization and washing
Direct and back flow wash out Hot water 80 °C, chemical reagents, CIP washing
(for filter cartridges)
Autoclaving 121-132 °С, 0,11 MPa, 30 min.
Steam sterilization * 132 °С, 0,2 MPa, 30 min.
* only for filter cartridges
technical documents on product quality and are certified for use in the
filtration processes of biopharmaceutical solutions. All EPV.S+ filter
cartridges are subjected to wash out from organic and mechanical
impurities with high-purity water.
Filter cartridge ordering information
EPV.S+ 200 D1 250
Grade Micron rating Adapter code Nominal height of filter cartridge
200= 2 μm А, D, D1, А1, А4, В, В(Sl) 125 = 125 mm
250 = 250mm (10")
500 = 500mm (20")
750 = 750mm (30")
1000=1000mm(40")
Filter capsule ordering information
KFV.S+ 200 K 60
Grade Micron rating Connection type Nominal height of filter cartridge
200= 2 μm K – sanitary clamp 60 = 60 mm (2,5")
R – thread cone-shaped 125 = 125 mm (5")
SH – hose barb fitting 250 = 250 mm (10")
500 = 500 mm (20")
750 = 750 mm (30")
1000 = 1000 mm (40")