I am interested in KFV.S Please call me back

KFV.S capsules are designed for effective protection of membrane filter elements and clarifying filtration of liquids.

Filter cartridge
Washed with ultra pure water
Produced in clean room conditions according to GMP
Filter capsule
Produced according to ISO 9001:2015
Show more
Filter cartridge
Washed with ultra pure water
Produced in clean room conditions according to GMP
Filter capsule
Produced according to ISO 9001:2015
Show more

The basis of the KFVS capsule is a high-density pleated filter medium made of micro-fine glass fibers. The improved mechanical strength of the capsule filter material is achieved by the presence of special protective layers, which eliminates the problem of "secondary pollution" and dusting of superfine fibers.

The filter material with high capacity, adsorption capacity, thermochemical stability provides effective filtration of solutions in a wide pH range, especially hard-to-filter solutions with residual opalescence, serums, proteins from plasma, viscous biological fluids, oils.

KFV.S capsule high efficiency (practically at the level of the membrane-based capsule) in combination with the increased dirt holding capacity typical of depth capsule provides cost-effective high-quality filtration in deep clarification processes and reducing microbiological load.

Features and applications
Specifications
Order information
Features and applications

Features

Advantages

Pleated filter element on the base of micro-fiberglass.

  • High filtration efficiency (>99,5%).
  • Stable biochemical properties. 
  • Available with rating 0,2; 0,5; 0,8 and 1  μm.
  • Более высокие показатели скорости потока при низком гидравлическом сопротивлении.

Excellent thermochemical resistance

  • Withstand multiple wash outs and sterilizations.

High strength, the stable matrix of the filter element

  • Filter material structure precludes possibility of “dusting” and medium migration.
  • Reliable maintenance of filter integrity under heavy duty operational conditions.
  • Longer filter lifetime.
Specifications

Materials

Filter material

Micro-fiberglass

Draining layer

Polypropylene

Body, end parts, adapter

Polypropylene

O-rings

Silicon (Viton, EPDM and others on request)

Operational parameters

Maximal differential pressure, MPa

0,4 at 20°C, 0,2 at 60°C

Maximal reverse differential pressure, MPa

0,2 at 20°C

Direct and reverse flow wash out

Hot water (up to 95°C) and chemical agents

Autoclaving

121°С, 0,12 MPa, 30 min, 10 cycles

Steam sterilization*

up to 132°С, 30 min., 25 cycles

*For detailed instructions on wash out and sterilization of cartridges and capsules please contact technical specialists of Technofilter RME.

Nominal dimensions

Height (H), mm 

Diameter (D), mm 

Filter surface area (S), m2 

125 (5")

70

0.25

250 (10")

70

0.5

500 (20")

70

1

750 (30")

70

1.5

1000 (40")

70

2

Micron rating

Pore size, μm

Ordering code 

0,2 μm

020

0,5 μm

050

1.0+0.5 μm

100/050

3.0+0.8 μm

300/080

3.0+1.0 μm 

300/100

Order information

KFV.S

020

К

60

Grade

Micron rating

Connection type

Capsule height

 

020 = 0.2 μm
050 = 0.5 μm
100/050 = 1.0+0.5 μm
300/080 = 3.0+0.8 μm
300/100 = 3.0+1.0 μm 

K – sanitary clamp

P – thread cone-shaped

60 = 60 mm (2,5")
125 = 125 mm (5")
250 = 250 mm (10")
500 = 500 mm (20")
750 = 750 mm (30")
1000 = 1000 mm (40")