KFM.K+ Capsule (0.2 and 0.45 μm)

I am interested in KFM.K+ Capsule (0.2 and 0.45 μm) Please call me back

KFM.K Capsule based on a hydrophilic polyamide membrane (Nylon 6 + 66) is used for preliminary, fine, clarifying and sterilizing filtration of liquid media in various industries from mechanical impurities and microorganisms with the size above or equal 0.1 μm.

Features and applications
Specifications
Safety
Order information
Features and applications

Main applications

In medicine and biopharmacy

  • For polishing and sterilization of small and medium volumes of injectables, infusion solutions, culture medium.
  • For filtration of individual solution lots.
  • For finish treatment on small volume fillers.
  • For finish treatment of water for injection.
  • For replacing disc filters 293 mm diameter.
  • In pharmacy for fine and sterilizing filtration.

In microelectronics

  • In ultra pure water points-of-use (removal of bacteria and colloids)
  • For filtration of photoresist individual lots.

In food industry

  • For finish treatment in production of small lots of beverages.
  • For ingredient filtration.
  • In experiments when choosing the optimal filtration schemes.
Specifications

KFM.K Capsule materials

Membrane material

Polyamide
Nylon6+Nylon66

Draining layer

Polypropylene

Capsule body, inner and outer bodies, tip covers, fittings

Polypropylene

KFM.K main combinations of pore sizes 

Single layer filter 

Double layer filter

Pore size, μm

Ordering code 

Pore size, μm

Ordering code 

0,45 

045 

0,20+0,20 

020/020 

0,65 

065 

0,45+0,20 

045/020 

0,80 

080 

0,65+0,45 

065/045 

1,0 

100 

0,80+0,65 

080/065 

Operational parameters

Mean membrane pore size, μm

0,1 

0,2 

0,45 

0,65 

0,8 

1,0 

Minimal bubble point, MPa

0,50 

0,36 

0,27 

0,17 

0,12 

0,10 

Initial water flow rates (for distilled water) at t=20°С, Р=0,05 МPа for filter cartridge 60 mm height для, dm3/h

100 

200 

350 

450 

500 

600 

Maximal operational pressure, MPa

0,4 

Maximal differential pressure for capsules, MPa

0,4 at 20°С; 0,1 at 60°С 

Maximal operational temperature, °C

60 

Effective filter area for filter cartridge 60 mm height (single layer/double layer), m2

0,21/0,15 

Effective filter area for filter cartridge 125 mm height (single layer/double layer), m2

0,32/0.42 

Effective filter area for filter cartridge 250 mm height (single layer/double layer), m2

0,64/0.85 

Recommended change-out differential pressure, MPA (bar)

0,24 (2,4) 

Number of sterilization cycles (autoclaving) at P=0,1 MPa и t=121 ±1°C for 30 min., at least

5* 

Sanitization and sterilization

Sterilization of Capsules is performed by autoclaving at temperature 121°С for 30 minutes after attainment of set-point temperature.

KFM.K Capsules are able to withstand at least 5 sterilization cycles by autoclaving at P = 0,1 MPa and t=121 ± 1°С. Note! It is prohibited to sterilize Capsule by steam-in-line.

*It is necessary to perform integrity testing of Capsules after every autoclaving cycle in case of sterilizing filtration and re-using. The integrity testing can be performed using automatic integrity test devices, for example TECHNOCHECK series.

KFM.K Capsules are compatible with wide variety of chemical substances.

For detailed instructions on operation Capsules please contact technical specialists of Technofilter RME.

Nominal dimensions

Height (H), mm 

Diameter (D), mm 

Filter surface area (S), m2 

1000 (40") 

88

750 (30") 

88

2.25 

500 (20") 

88

1.5 

250 (10") 

88

0.75 

125 (5") 

88

0,34 

60 (2,5") 

88

0.2 

Safety

Quality and Certification

All membrane filter elements used for production of KFM.K Capsules are subjected to wash out from organic and mechanical impurities with high-purity water and to 100% integrity control.

KFM.K Capsules are added to the Register of Medical Devices of the Ministry of health of the Russian Federation.

The Capsules are certified for use in Medical Industry and Sanitary and Epidemiological Station, they are authorized to use in Food industry. Safety of filter cartridges is determined by a series of sanitary and chemical tests, and toxicology tests in compliance with GOST R ISO 10993.1-99, GOST R ISO 10993.5-99, GOST R ISO 10993.10-00.

Order information

KFM.K Capsules (0.2 и 0.45 μm) ordering information

KFM.K

065

К

60

Grade

Micron rating

Connection type

Capsule height

 

020/020 = 0,2+0,2 μm
045/020=0,45+0,2 μm
065/045=0,65+0,45 μm

K – sanitary clamp

P – thread cone-shaped

60 = 60 mm (2,5")
125 = 125 mm (5")
250 = 250 mm (10")
500 = 500 mm (20")
750 = 750 mm (30")
1000 = 1000 mm (40")