For effective and efficient filtration of small volumes and liquids and gases.
Mini-capsule filters are intended fro filtration of small batches of expensive products, for air devices protection, for tank breathing and other laboratory and small-scale industrial processes.
Mini-capsule filter is ready for use complete non-detachable filter 100 mm height and 48 mm diameter composed of a polypropylene housing with a membrane (MKM) or fiber (MKV) pleated mini cartridge with the filtration surface area up to 0.07 m2 (700 cm2) press fitted in it.
The structure allows using mini-capsule filters without installation of steel equipment. The mini-capsule filter is available with a single type of connection:
- nipple (joining pipe) for the 8-10 mm hose (DN – 6 mm), discharge valve
- clamp (sanitary) connection.
Main applications
- Filtration of small volume of liquids, especially expensive batches of product.
- Fine and sterilizing air filtration at vessel inlet.
- Air filtration for protection of devices and vacuum pumps.
- As an alternative for filter and capsule disks, injection nozzles, etc.
Advantages
- Efficient and compact.
- Quick replacement and easy operation.
- Highly secure due to improved tightness of the structure.
- Possibility to operate at high filtration rates.
- During manufacture of mini-capsule filters, all filter cartridges are washed with filtered water and subjected to integrity testing.
Materials
|
Brand |
Filtering material |
Pore size (micron ratio) |
Application |
|---|---|---|---|
|
МКМ.К |
membrane from polyamide Nylon6+66 |
0,1 -3 micron |
for filtration of liquids |
|
МКМ.К+ |
membrane from polyamide Nylon6+66 with positive Zeta-potential |
0.2, 0.45 micron |
for filtration of liquids |
|
МКМ.PS |
membrane from polyethersulfone (PES) |
0.2, 0.45, 0.65 micron |
for filtration of liquids |
|
МКМ.F4 |
membrane from fluoroplast (PTFE) |
0.2 micron |
for filtration of air and gases |
|
МКVg.P |
polypropelene |
0.2 - 20 micron |
for filtration of liquids and gases |
Operating parameters
|
Maximum pressure drop, MPa |
0,3 at 20°C, 0,1 at 60°C |
|
Operating temperature, °С |
0-60 |
|
pH range |
basic filtering material |
Sterilization
|
Autoclaving |
121°С, 0,11 MPa, 30 min, 3 cycles |
|
Gamma-radiation is possible. |
|
Ordering information
|
МКМ.PS |
045/020 |
|---|---|
|
Brand |
Micron rating |
|
МКМ.К |
0,2-3 micron |
|
МКМ.К+ |
0,2; 0,45 micron |
|
МКМ.PS |
0,2; 0,45; 0,65 micron |
|
МКМ.F4 |
0,2 micron |
|
МКVg.P |
0,2-20 micron |